High Performance Dynamic Checkweigher by Hardy
San, Diego, CA
Hardy's Dynamic Series of checkweighing machinery is built using off-the shelf components, with controls based on a Rockwell Automation's CompactLogix platform, providing a standardized open source architecture that is flexible enough to meet both current and future control needs.
Weight processing is managed by Hardy’s HI 4050CW Weight Controller. Sampling weight data at 4,800 times per second, the HI4050CW is capable of providing enough weighments to accurately categorize packages weighing from 5g to 225kg at speeds up to 350 packs per minute.
Hardy Dynamic checkweighers are built using a Rockwell CompactLogix® platform running Studio5000® making them the easiest to integrate, upgrade and modify. The GUI uses FactoryTalk View software, giving the user the ability to share and modify information presented on the machine’s HMI to the larger Connected Enterprise®. Extra onboard I/O and the ability to expand the rack provide a future proof control platform that is ready to accommodate additional upstream and downstream closed-loop controls, as well as peripherals such as metal detection and x-rays. All data tags are available to Enterprise wide software.
MOTORIZED DRIVE ROLLERS
Gearing and motor are integrated into the roller. Extremely efficient with no exposed moving parts, motorized drive rollers are available in a variety of speed and torque ratings so they can be tailored to the specific requirements of your application. Available in stainless steel the series is rated for IP66 wash-down environments. Smart drives eliminate the possibility of over-torque or binding that could cause motor or belt damage, creating a safer and higher reliability conveying system.
Belts can be removed, inspected, replaced and cleaned without the use of tools. A simple cam-lock secures belts in position and at the correct tension – making change-overs fast and easy.
The Dynamic C, S and I series are built using welded Stainless Steel tube construction, created a very ridged and long lasting frame that will withstand even the most abusive environments. Built to handle virtually every product in any environment, only simple modifications are required to change bed widths and lengths. The Dynamic L series is designed for very heavy packages and therefore is constructed of steel channel.
The new Dynamic CIP is a specialized CIP version of the checkweigher designed to meet demands of food and chemical manufacturers. The new Dynamic Checkweigher CIP uses framework that minimizes horizontal flat surfaces, using sloped faces and round tubing where possible, and a sloped cabinet. An enhanced safety conveyer design minimizes entrapment and other hazards from rotating shafts or equipment. Changes to Hardy’s manufacturing techniques helped adapt the Dynamic Checkweigher to meet the sanitary and hygienic standards CIP clients require.
EASE OF SETUP & CALIBRATION
Intuitive menus presented on a large Allen Bradly PanelView Plus® HMI provide a comfortable environment for setting up product recipes, tuning the machine for optimum performance and setting up the scale system. Use Hardy's exclusive C2® for automatic scale calibration. Use the Internal Trigger mode and eliminate the need for a photo-eye.
FULL STATISTICS & DIAGNOSTICS PACKAGES
The Diagnostics Section allows users to visualize the process and make adjustments. This saves so much time over the guesswork that is required with other checkweigher machinery.
All the process performance statistics are calculated and available on the network. Because the machine is open source, use the data to optimize your process upstream.
Hardy Dynamic Checkweigher